Aventics (brand of Emerson) 0822060524
  Aventics (brand of Emerson) 0822060524

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822060524 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822060524

Description

Functional principle double-acting
Cushioning hydraulic
non-adjustable
Magnetic piston with magnetic piston
Piston diameter 12 mm
Stroke 125 mm
Housing Aluminum
Sealing material Polyurethane
Compressed air connection M5

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822060524

If you are questing Aventics (brand of Emerson) 0822060524, make contact with FAMAGA, the world's foremost producer of machine made equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and special attention to each consumer. We appreciate everyone, who engaged with us - therefore, our regular consumers get the most convenient purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the world . A well-elaborated logistics link and a partnership network guide us to send our goods anywhere in the world promptly without discrediting product quality.

A particular source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the field of factory-made equipment.

All items from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.

To get some advice or book, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 0822060524

Working pressure min./max. See table
Ambient temperature min./max. 0 ... 65 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Note: Hydraulic shock absorber on rear side are included in scope of delivery
Material
Housing Aluminum, anodized
Seal Polyurethane
Front plate Steel, galvanized
Guide rod Steel, hardened
Bearing Steel, hardened
Piston rod Stainless steel