We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822332205
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822332205, reach FAMAGA, the world's foremost company of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and private attention to each orderer. We appreciate everyone, who cooperated with us - so, our regular clients pick up the most desirable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Lebanon, Samoa, Central African Republic, Chad, Tajikistan, Nigeria, Paraguay, Kenya, Thailand, Senegal, Denmark, Estonia, India, Eritrea, Vietnam, Iraq, Uzbekistan, Belarus, Montenegro, Pakistan, Uruguay, Kuwait, Serbia, Tonga, Lithuania, Sweden, Turkey, Qatar, Antigua and Barbuda, Moldova, Iceland, Afghanistan, Mali, Libya, Djibouti, Kazakhstan, United States, Czech Republic, Malaysia, Algeria, Malta, Slovakia, Macedonia, Ukraine, Benin. A advanced logistics system and a partnership network assist us to conduct our units anywhere in the globe immediately without undermining product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |