We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822433303
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822433303, communicate with FAMAGA, the world's central supplier of industrial equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each client. We cherish everyone, who cooperated with us - therefore, our regular customers pick up the most convenient purchase forms and discounts on the manufacturing equipment market. Nowadays, there are more than 4500 such consumers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Venezuela, Kyrgyzstan, Japan, South Sudan, Indonesia, Belgium, Oman, Hungary, Andorra, Bangladesh, Latvia, North Korea, Botswana, Monaco, China, Eritrea, Tajikistan, Cameroon, Fiji, Poland, Swaziland, Serbia, Brazil, Cyprus, Togo, Liberia, Cape Verde, Paraguay, Egypt, Seychelles, Uruguay, Benin, Ireland, Mauritius, Madagascar, Dominica, Albania, Switzerland, Laos, Nepal, Chile, Mauritania, Yemen. A well-elaborated logistics system and a partnership network allow us to deliver our items anywhere in the world immediately without discrediting product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.
To ask a question or make a request, get in touch with us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |