We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R422001193 (CCI-DA-020-0040-00412241100000) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI
Part number
R422001193
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422001193 (CCI-DA-020-0040-00412241100000) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI R422001193, communicate with FAMAGA, the world's chief distributor of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of goods and particular attention to each orderer. We esteem everyone, who conspired with us - so, our regular consumers bring in the most favorable purchase forms and discounts on the industrial equipment market. At present, there are more than 4 thousand such buyers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, San Marino, Libya, The Bahamas, El Salvador, Yemen, Burma, Romania, Rwanda, Eswatini, Equatorial Guinea, Indonesia, Andorra, United States, Guyana, Estonia, Japan, Canada, North Korea, Russia, Seychelles, Nepal, Albania, Slovakia, United Arab Emirates, China, Uzbekistan, Luxembourg, Kazakhstan, Belarus, Mexico, Uganda, Ireland, Egypt, Haiti, Brunei, East Timor, Samoa, Togo, Lithuania, Suriname, Israel, Burkina Faso, Kuwait. A well-shaped logistics network and a partnership network assist us to send our products anywhere in the globe promptly without undermining product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the range of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To inquire or order, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Scraper | Polyurethane |