We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822032203
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822032203, reach FAMAGA, the world's foremost company of industrial equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of outputs and special attention to each orderer. We admire everyone, who engaged with us - thus, our regular consumers receive the most flexible purchase terms and discounts on the manufacturing equipment market. Today, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Algeria, Switzerland, Estonia, Dominican Republic, Cameroon, Malawi, Bangladesh, Moldova, Papua New Guinea, Namibia, Swaziland, Mozambique, United Arab Emirates, Philippines, Greece, Cape Verde, Costa Rica, The Bahamas, Jamaica, Afghanistan, New Zealand, Ireland, South Korea, Kenya, Cyprus, Seychelles, Bosnia and Herzegovina, Sweden, Zimbabwe, Qatar, Kuwait, Morocco, Bolivia, Jordan, Vietnam, Madagascar, Belarus, Ghana, Panama, Uganda, Dominica, Andorra. A well-elaborated logistics link and a partnership network cheer us to send our items anywhere in the earth on-time without discrediting product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of industrial equipment.
All products from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or make a request, contact us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |