We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480643769
Description
ball rail guide | With integrated “Medium Performance” ball rail system |
double piston | with double piston |
Functional principle | double-acting |
Cushioning | Elastic with metal end stop |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Stroke | 30 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480643769, call FAMAGA, the world's prime retailer of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and particular attention to each orderer. We value everyone, who conspired with us - hence, our regular clients obtain the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such customers, and we constantly make new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Armenia, Malaysia, Congo, Cuba, Mexico, Andorra, South Sudan, Indonesia, Belgium, Slovenia, Colombia, Kyrgyzstan, Canada, Suriname, Cape Verde, Guatemala, Togo, Madagascar, Latvia, Vietnam, Zambia, Jamaica, Samoa, Austria, South Korea, Azerbaijan, Guyana, Botswana, Finland, Central African Republic, Yemen, Cameroon, Costa Rica, Qatar, Morocco, Syria, Luxembourg, Denmark, Peru, East Timor, Swaziland, Iraq, Benin, Bolivia, Djibouti, Slovakia. A advanced logistics bond and a partnership network guide us to conduct our goods anywhere in the globe quickly without undermining product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Repetitive precision | 0,02 mm |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Repetitive precision after 100 consecutive strokes: 0,02 mm Base with air connections at the back and sides Intermediate strokes can be configured. Scope of delivery: incl. centering rings R1 = stroke setting range for forward stroke R2 = stroke setting range for return stroke Ø 8 has a different reference plane. |
Material |
---|
Housing | Aluminum, anodized |
Piston rod | Stainless steel |
Front plate | Aluminum, anodized |
Seal | Polyurethane |
Ball rail table | Aluminum, anodized |
Guide rail | Steel, hardened |
Centering rings | Stainless steel |