We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5794670210
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 850 l/min |
Compressed air connection input | Ø 8x1 |
Compressed air connection output | Ø 8x1 |
DC operating voltage | 12 V |
Activation | Electrically |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5794670210, call FAMAGA, the world's prime producer of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are represented in the quality of outcomes and special attention to each user. We cherish everyone, who collaborated with us - therefore, our regular clients obtain the most beneficial purchase forms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such clients, and we constantly compose new agreements. More than 750 purchases are terminated per day, because FAMAGA works all over the globe Germany, United Kingdom, Liechtenstein, Italy, Papua New Guinea, Uruguay, Mexico, Kenya, Chad, Kazakhstan, Azerbaijan, India, China, Cape Verde, Monaco, Macedonia, Panama, Suriname, Eritrea, Kuwait, Jamaica, Tunisia, Brunei, Equatorial Guinea, Mozambique, Haiti, Philippines, El Salvador, Niger, United States, Tajikistan, Costa Rica, Bolivia, Czech Republic, Pakistan, Afghanistan, Lithuania, Dominica, Ghana, East Timor, Namibia, Luxembourg, Egypt, Angola, Swaziland, Nepal, Malaysia. A well-built logistics chains and a partnership network let us to conduct our goods anywhere in the planet immediately without disreputing product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this amount is rising every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To consult or order, contact us or write a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |