We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5794475280
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection input | Ø 6x1 |
Compressed air connection output | Ø 6x1 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5794475280, connect FAMAGA, the world's foremost producer of streamlined equipment. Our company has worked for more than ten years - these are cycles of experience, which are outlined in the quality of outputs and particular attention to each customer. We praise everyone, who worked with us - hence, our regular consumers get the most beneficial purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such purchasers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the earth Germany, United Kingdom, Belize, Bahamas, Honduras, Bangladesh, Madagascar, Kiribati, Uzbekistan, Bulgaria, Burundi, Iceland, Luxembourg, Serbia, Nicaragua, Armenia, Switzerland, Syria, Monaco, Suriname, Malaysia, North Korea, Kuwait, Sierra Leone, Mexico, Saudi Arabia, Qatar, Georgia, Hungary, Egypt, Turkmenistan, Tajikistan, China, Austria, United States, Indonesia, Namibia, Mauritius, Senegal, Haiti, Brazil, Albania, Burkina Faso, Jamaica, Morocco, Sweden, Panama. A well-shaped logistics link and a partnership network allow us to ship our goods anywhere in the world promptly without disreputing product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To consult or order, get in touch with us or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |