We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5794475220
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection input | Ø 6x1 |
Compressed air connection output | Ø 6x1 |
Operational voltage AC at 50 Hz | 24 V |
Operational voltage AC at 60 Hz | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5794475220, get in touch with FAMAGA, the world's key retailer of industrial equipment. Our company has progressed for more than ten years - these are ages of experience, which are symbolized in the quality of products and individual attention to each consumer. We respect everyone, who liased with us - hence, our regular purchasers accept the most attractive purchase terms and discounts on the factory-made equipment market. At this time, there are more than 3500 such clients, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Burundi, Papua New Guinea, Canada, Sudan, Indonesia, India, Turkmenistan, Senegal, Jordan, Mongolia, Serbia, Peru, Fiji, Nigeria, Bolivia, East Timor, Sweden, Qatar, Tonga, Nepal, Bosnia and Herzegovina, Afghanistan, Chad, Cyprus, Jamaica, Israel, Mauritania, Liechtenstein, The Bahamas, Cape Verde, Kazakhstan, Ireland, Brunei, Argentina, Costa Rica, Turkey, Zimbabwe, Niger, Finland, South Korea, Philippines, Suriname, Dominica, United Arab Emirates. A advanced logistics bond and a partnership network let us to conduct our products anywhere in the world on-time without damaging product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is rising every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more progressive and technologically innovative industrial equipment so as stay in control.
To ask a question or order, get in touch with us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |