We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822031214
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 400 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822031214, get in touch with FAMAGA, the world's dominant vendor of factory-made equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each consumer. We appreciate everyone, who worked with us - so, our regular clients procure the most desirable purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4500 such customers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Morocco, Tonga, Slovakia, Rwanda, Myanmar, Cyprus, South Sudan, Belgium, Lebanon, Brunei, Burundi, Cameroon, Suriname, Chad, Japan, Liechtenstein, Fiji, Gambia, Grenada, United States, Algeria, Costa Rica, Namibia, Libya, Iceland, Niger, Iraq, Uganda, Kiribati, Yemen, Malaysia, Jordan, Mali, Guatemala, Denmark, Ukraine, Hungary, Turkey, Nigeria, Norway, Samoa, Bangladesh, Afghanistan, Montenegro, Bosnia and Herzegovina. A advanced logistics bond and a partnership network cheer us to conduct our items anywhere in the globe as soon as possible without damaging product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or book, get in touch with us or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |