We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226611750
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 175 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5226611750, communicate with FAMAGA, the world's primary retailer of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and particular attention to each consumer. We value everyone, who liased with us - hence, our regular clients procure the most convenient purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such clients, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Suriname, Andorra, Chile, Kyrgyzstan, Palestine, Panama, Russia, Lebanon, Burma, Yemen, Jordan, Malta, Sweden, Liberia, Monaco, Azerbaijan, South Sudan, Uzbekistan, Malawi, Ireland, Iraq, Haiti, Argentina, Paraguay, Mongolia, Slovakia, Sierra Leone, Bangladesh, India, Swaziland, Qatar, Antigua and Barbuda, Namibia, Egypt, Eswatini, Macedonia, Israel, Thailand, Iceland, Kenya, Pakistan, Sudan, Latvia, Bulgaria, Georgia. A well-shaped logistics bond and a partnership network cheer us to conduct our goods anywhere in the world on-time without compromising product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the field of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To consult or make a request, get in touch with us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |