We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226611500
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 150 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5226611500, reach FAMAGA, the world's central supplier of industrialized equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of outputs and personalseparate attention to each client. We cherish everyone, who liased with us - therefore, our regular consumers get the most acceptable purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4000 such buyers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Congo, Greece, Australia, Uganda, Belize, Botswana, Djibouti, Lesotho, Jordan, France, Armenia, Laos, Denmark, Palestine, Panama, Oman, Ukraine, Togo, Grenada, Tanzania, North Korea, Bhutan, Yemen, Bulgaria, Equatorial Guinea, Czech Republic, Iran, Malaysia, Hungary, Liechtenstein, Uzbekistan, Samoa, Nigeria, Montenegro, Kuwait, Namibia, Slovakia, Ecuador, Uruguay, Kyrgyzstan, Brazil, Latvia, Norway, Zimbabwe, Antigua and Barbuda, Luxembourg. A well-elaborated logistics link and a partnership network let us to dispatch our items anywhere in the earth with no delay without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are glad that users choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, get in touch with us or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |