We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019806
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M3 |
Standardization | ISO 15524 |
Stroke | 40 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412019806, get in touch with FAMAGA, the world's major company of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each purchaser. We understand everyone, who engaged with us - so, our regular consumers bring in the most favorable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Peru, Dominican Republic, Cameroon, Romania, Algeria, Luxembourg, Madagascar, Albania, Tajikistan, Liberia, Slovenia, Suriname, Samoa, Uruguay, Moldova, Mauritius, Equatorial Guinea, Dominica, Kuwait, Djibouti, Ireland, Togo, Namibia, Guatemala, Serbia, Iran, Tonga, Croatia, Seychelles, Poland, El Salvador, Guyana, Iceland, Cyprus, Pakistan, Philippines, Eswatini, Mexico, Niger, India, United Arab Emirates, Finland, Syria, Afghanistan, Indonesia, Georgia. A well-shaped logistics connection and a partnership network let us to conduct our products anywhere in the globe with no delay without undermining product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or order, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |