We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822062429
Description
Functional principle | double-acting |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Stroke | 150 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822062429, communicate with FAMAGA, the world's leading producer of industrial equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each client. We respect everyone, who cooperated with us - therefore, our regular clients receive the most desirable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Burma, Saudi Arabia, Spain, Algeria, Cameroon, Brazil, Cyprus, Turkey, Congo, Uruguay, Estonia, Ukraine, Iceland, Iran, Yemen, Kazakhstan, Panama, Paraguay, Mexico, Tanzania, United States, Nigeria, Thailand, Montenegro, Tonga, North Korea, Comoros, Czech Republic, The Gambia, Azerbaijan, Zambia, Norway, Ireland, Denmark, Macedonia, Senegal, Kyrgyzstan, New Zealand, Lithuania, Armenia, Egypt, Antigua and Barbuda, Morocco, Uganda, Switzerland. A well-elaborated logistics system and a partnership network let us to conduct our items anywhere in the globe immediately without undermining product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or make a request, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 0 ... 65 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Hydraulic shock absorber on rear side are included in scope of delivery |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |