We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480141034
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480141034, contact FAMAGA, the world's top company of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each consumer. We cherish everyone, who engaged with us - therefore, our regular buyers pick up the most favorable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4500 such buyers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Nicaragua, Angola, Honduras, Cambodia, Slovenia, Togo, Mexico, Nigeria, Costa Rica, Eritrea, Bahamas, Moldova, Samoa, Guatemala, Zimbabwe, Equatorial Guinea, Sweden, Iceland, Morocco, New Zealand, Peru, Libya, Ireland, Haiti, Syria, Cape Verde, China, Australia, Kuwait, Norway, Qatar, Belarus, Albania, Paraguay, Luxembourg, Pakistan, Mauritius, Swaziland, Russia, Burkina Faso, United States, Kazakhstan, Switzerland, Bosnia and Herzegovina, Philippines, Zambia. A well-shaped logistics bond and a partnership network cheer us to send our goods anywhere in the planet on-time without undermining product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this amount is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or order, call us by phone or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |