Aventics (brand of Emerson) R480627527
  Aventics (brand of Emerson) R480627527

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

R480627527 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

R480627527

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Piston diameter 320 mm
Piston rod thread M48x2
Standardization ISO 15552
Stroke 125 mm
Sealing material Acrylonitrile butadiene rubber
Scraper Acrylonitrile butadiene rubber
ATEX optional
Compressed air connection G 1
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications R480627527

If you are looking for Aventics (brand of Emerson) R480627527, communicate with FAMAGA, the world's the best distributor of mechanized equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and private attention to each client. We cherish everyone, who collaborated with us - so, our regular consumers get the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the globe . A well-shaped logistics connection and a partnership network guide us to ship our elements anywhere in the globe with no delay without disreputing product quality.

A specific source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the direction of factory-made equipment.

All outputs from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that users choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as stay in control.

To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.

Features R480627527

Standards ISO 15552
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 2 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
The trunnion mounting is positioned in the center at the factory and can be adjusted later. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator.
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Acrylonitrile butadiene rubber
Nut for piston rod Steel, galvanized
Scraper Acrylonitrile butadiene rubber
Trunnion mounting Nodular graphite iron
Tie-rods Stainless steel