We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177195
Description
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 254 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 3/8 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480177195, call FAMAGA, the world's top supplier of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are depicted in the quality of products and particular attention to each client. We value everyone, who collaborated with us - so, our regular purchasers pick up the most beneficial purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Burundi, Kuwait, Singapore, Bahamas, Mauritania, Cambodia, Honduras, Mauritius, Niger, Russia, Jordan, Lebanon, Togo, Guyana, Romania, The Bahamas, Botswana, Armenia, Benin, Uruguay, Kiribati, Cape Verde, Syria, Serbia, Turkey, Seychelles, Haiti, Mexico, Iran, Estonia, Switzerland, Ireland, Croatia, Georgia, Nigeria, Dominica, Montenegro, Morocco, Norway. A advanced logistics connection and a partnership network guide us to conduct our products anywhere in the planet quickly without damaging product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |