We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822344608
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 250 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822344608, connect FAMAGA, the world's prime producer of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of merchandises and particular attention to each user. We appreciate everyone, who worked with us - hence, our regular consumers receive the most convenient purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such purchasers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, San Marino, Montenegro, Jamaica, Egypt, Iceland, Macedonia, Cuba, Malaysia, Japan, Latvia, Vietnam, Togo, Bulgaria, Argentina, Haiti, Honduras, Seychelles, Grenada, Oman, Mauritania, Mozambique, Fiji, Eritrea, Burundi, The Bahamas, Pakistan, Sierra Leone, Monaco, Moldova, Guatemala, Azerbaijan, Nicaragua, Samoa, China, Kyrgyzstan, Luxembourg, United States, Russia, Mauritius, United Arab Emirates, Nepal, Yemen, The Gambia, Poland, Benin, Burkina Faso, Sudan. A advanced logistics bond and a partnership network assist us to dispatch our units anywhere in the world promptly without discrediting product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as stay in control.
To request or place an order, contact us or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |