We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001270
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422001270, reach FAMAGA, the world's influential producer of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each purchaser. We esteem everyone, who joined with us - thus, our regular consumers procure the most convenient purchase forms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such customers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Slovenia, Uruguay, Vietnam, Comoros, Argentina, Zambia, Singapore, Togo, El Salvador, Morocco, Luxembourg, Albania, Central African Republic, Rwanda, Romania, Monaco, Yemen, Liechtenstein, Guyana, Mexico, Brunei, South Sudan, Andorra, The Gambia, Belarus, Russia, Angola, Kyrgyzstan, Seychelles, Malta, Jamaica, Mauritania, Samoa, Bulgaria, Benin, Poland, Malaysia, Jordan, Estonia, Costa Rica, Syria, Panama, Indonesia, South Korea, Latvia, Philippines. A advanced logistics connection and a partnership network allow us to dispatch our goods anywhere in the world immediately without compromising product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of factory-made equipment.
All goods from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is growing every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To ask a question or make a request, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |