We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627526
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 320 mm |
Piston rod thread | M48x2 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Acrylonitrile butadiene rubber |
ATEX optional | |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480627526, make contact with FAMAGA, the world's major provider of machine made equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and particular attention to each user. We praise everyone, who liased with us - so, our regular purchasers bring in the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Canada, Bangladesh, Togo, Latvia, Niger, Mali, Netherlands, Cape Verde, Georgia, Dominica, Albania, Pakistan, Sudan, Libya, Japan, Nicaragua, Nepal, Belize, South Sudan, Madagascar, Kuwait, Angola, Tanzania, Philippines, Poland, The Gambia, Jamaica, Paraguay, Afghanistan, Andorra, Malaysia, South Korea, Benin, Thailand, Guatemala, Comoros, Panama, Cameroon, Peru, Tajikistan, Costa Rica, Switzerland, Swaziland, Seychelles, Brunei, Qatar. A advanced logistics system and a partnership network allow us to conduct our items anywhere in the globe quickly without damaging product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of factory-made equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more developed and technologically advanced industrial equipment so as stay in control.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The trunnion mounting is positioned in the center at the factory and can be adjusted later. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |
Nut for piston rod | Steel, galvanized |
Scraper | Acrylonitrile butadiene rubber |
Trunnion mounting | Nodular graphite iron |
Tie-rods | Stainless steel |