We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480176519
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | 3/4-16 UNF |
Stroke | 76.2 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 3/8 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480176519, catch up with FAMAGA, the world's main supplier of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of products and private attention to each purchaser. We esteem everyone, who joined with us - so, our regular buyers obtain the most beneficial purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, San Marino, Finland, Suriname, Paraguay, Israel, El Salvador, Botswana, Vietnam, Bhutan, Bahamas, Egypt, Burkina Faso, Canada, Netherlands, Thailand, Angola, Haiti, Andorra, Malaysia, Sweden, Costa Rica, The Bahamas, Panama, Guyana, Iceland, Bolivia, Brunei, United Arab Emirates, Switzerland, Iran, Morocco, India, Djibouti, Indonesia, Poland, Equatorial Guinea, Comoros, Kuwait, Estonia, Kenya, Guatemala, Tonga, Philippines, Peru, Mauritius, Swaziland, Syria, China. A well-shaped logistics network and a partnership network allow us to ship our products anywhere in the planet quickly without discrediting product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as keep on top of it.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |