We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503290
Description
Standardization | ISO 5599-1 |
Accessory type | type H |
Frame size | ISO 1 |
Housing | Die-cast aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 1825503290, call FAMAGA, the world's leading provider of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of items and individual attention to each client. We admire everyone, who joined with us - so, our regular consumers pick up the most attractive purchase terms and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such customers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Eritrea, Seychelles, Portugal, Canada, Bangladesh, Italy, Australia, Togo, Afghanistan, Botswana, Yemen, Japan, Gambia, Nepal, Angola, Croatia, Honduras, Djibouti, Fiji, Zambia, Peru, Liberia, Ecuador, Cyprus, Samoa, Israel, United States, Tajikistan, Pakistan, Benin, Nicaragua, South Sudan, Slovakia, Guatemala, Zimbabwe, Suriname, Malaysia, Syria, Belize, Belarus, Argentina, Brunei, Laos, Luxembourg, Poland, United Arab Emirates, Antigua and Barbuda, Panama, Egypt. A well-shaped logistics connection and a partnership network assist us to dispatch our goods anywhere in the planet with no delay without disreputing product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is increasing every day. We are pleased that buyers choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as not to lower the bar.
To ask a question or order, contact us or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 5599-1 |
Working pressure min./max. | 0 ... 16 bar |
Ambient temperature min./max. | -15 ... 70 °C |
Medium temperature min./max. | -15 ... 80 °C |
Medium | Compressed air |
Grid dimension | 43 mm |
Exhaust type | Ports separated |
Mounting screw | with hexagon socket |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Die-cast aluminum |
Base plate | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |