We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503288
Description
Standardization | ISO 5599-1 |
Accessory type | type H |
Frame size | ISO 1 |
Housing | Die-cast aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Compressed air connection output | G 1/4 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 1825503288, connect FAMAGA, the world's key vendor of streamlined equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each consumer. We understand everyone, who joined with us - hence, our regular buyers pick up the most desirable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Netherlands, Comoros, Congo, Oman, Sudan, Dominican Republic, New Zealand, Djibouti, Latvia, Benin, Swaziland, Monaco, Uzbekistan, Morocco, The Gambia, Malaysia, Canada, China, South Sudan, Lithuania, Albania, Gambia, Belize, Panama, Pakistan, Rwanda, Ireland, Chad, Botswana, United States, Fiji, Russia, Chile, Egypt, Tajikistan, Sweden, Qatar, East Timor, Burundi, Burkina Faso, Moldova, Yemen, Zambia, Serbia, Mozambique, Vietnam, Tunisia, United Arab Emirates, Mauritania. A well-built logistics bond and a partnership network let us to ship our elements anywhere in the planet immediately without damaging product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are happy that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To inquire or book, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 5599-1 |
Working pressure min./max. | 0 ... 16 bar |
Ambient temperature min./max. | -15 ... 70 °C |
Medium temperature min./max. | -15 ... 80 °C |
Medium | Compressed air |
Grid dimension | 43 mm |
Exhaust type | Ports separated |
Mounting screw | with hexagon socket |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Die-cast aluminum |
Base plate | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |