Aventics (brand of Emerson) 0821301702
  Aventics (brand of Emerson) 0821301702

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0821301702 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0821301702

Description

Parts Micro oil-mist lubricator
Type of filling Manual oil filling
Housing Die cast zinc
Reservoir Polycarbonate
Sealing material Acrylonitrile butadiene rubber
suitable for ATEX
Nominal flow Qn 1000 l/min
Compressed air connection G 1/8

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0821301702

If you are questing Aventics (brand of Emerson) 0821301702, connect FAMAGA, the world's central provider of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are illustrated in the quality of merchandises and special attention to each buyer. We esteem everyone, who collaborated with us - therefore, our regular consumers obtain the most attractive purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such consumers, and we constantly sign new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the earth . A well-elaborated logistics chains and a partnership network allow us to send our goods anywhere in the planet immediately without discrediting product quality.

A special source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the field of factory-made equipment.

All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been provided, and this number is ascending every day. We are proud that clients choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as not to lower the bar.

To get some advice or place an order, phone us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features 0821301702

Version Micro oil-mist lubricator, Can be assembled into blocks
Parts Micro oil-mist lubricator
Mounting orientation vertical
Certificates suitable for ATEX
Working pressure min./max. 0,5 ... 16 bar
Ambient temperature min./max. -10 ... 60 °C
Medium temperature min./max. -10 ... 60 °C
Medium Compressed air Neutral gases
Lubricator reservoir volume 35 cm³
Type of filling Manual oil filling
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Only approx. 10% of the preset drip quantity enters the compressed air system. oil filling not possible during operation. Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details.
Oil dosing at 1000 l/min 10-20 drops
Material
Housing Die cast zinc
Seals Acrylonitrile butadiene rubber
Reservoir Polycarbonate Die cast zinc