We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822343505
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822343505, communicate with FAMAGA, the world's chief vendor of streamlined equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and special attention to each customer. We esteem everyone, who conspired with us - so, our regular purchasers obtain the most flexible purchase forms and discounts on the manufacturing equipment market. At present, there are more than 3500 such clients, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Finland, Lebanon, Mongolia, Andorra, Croatia, Macedonia, Georgia, Liechtenstein, Jordan, Belgium, Greece, Hungary, Indonesia, Ireland, Grenada, The Bahamas, Gambia, Paraguay, Turkey, Tonga, Vietnam, Iraq, Tunisia, Bosnia and Herzegovina, Djibouti, Eswatini, Morocco, Central African Republic, Iceland, Australia, Belize, Thailand, Algeria, Moldova, Samoa, Ghana, Serbia, Nigeria, Kyrgyzstan, Norway, Philippines, Kenya, Rwanda. A advanced logistics series and a partnership network assist us to ship our units anywhere in the globe immediately without discrediting product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are glad that users choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or make a request, get in touch with us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |