We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472411255
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7472411255, reach FAMAGA, the world's central distributor of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and private attention to each consumer. We admire everyone, who cooperated with us - therefore, our regular clients procure the most flexible purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such purchasers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Mexico, Jordan, Czech Republic, Greece, Chad, Albania, Slovakia, Luxembourg, Burma, Kenya, Armenia, Kazakhstan, New Zealand, Palestine, Grenada, Yemen, Malta, Eswatini, Equatorial Guinea, Eritrea, Lithuania, United States, Tunisia, Iceland, North Korea, Mauritania, Namibia, Belize, Antigua and Barbuda, Kyrgyzstan, Angola, Kiribati, Burundi, United Arab Emirates, Senegal, Afghanistan, Sierra Leone, Mozambique, Rwanda, Uganda, Moldova, Peru, Brazil, Central African Republic. A well-developed logistics bond and a partnership network let us to deliver our elements anywhere in the earth as soon as possible without undermining product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is ascending every day. We are happy that users choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, phone us or write a message to the online chat on our site. You can also forward a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |