We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822062007
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Stroke | 25 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822062007, communicate with FAMAGA, the world's major producer of industrialized equipment. Our company has advanced for more than ten years - these are years of experience, which are represented in the quality of spare parts and particular attention to each customer. We respect everyone, who conspired with us - hence, our regular clients obtain the most flexible purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Gabon, Kazakhstan, Georgia, Comoros, Botswana, Monaco, Lithuania, Belarus, Mongolia, Oman, Togo, Luxembourg, Madagascar, Congo, Sweden, Colombia, Eritrea, Thailand, Malaysia, Honduras, Vietnam, Haiti, Pakistan, Brazil, Philippines, Peru, Qatar, Hungary, Chad, Japan, United States, Angola, Jamaica, Seychelles, Antigua and Barbuda, Nicaragua, Cape Verde, The Gambia, Norway, Swaziland, Ghana, Russia, Libya, Mozambique, East Timor, Guatemala, Zambia, Egypt, Syria. A well-shaped logistics link and a partnership network allow us to deliver our goods anywhere in the globe on-time without undermining product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To inquire or book, contact us or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |