We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822342902
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822342902, make contact with FAMAGA, the world's central supplier of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each client. We praise everyone, who worked with us - hence, our regular customers receive the most convenient purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such buyers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Colombia, Belarus, Spain, Costa Rica, Finland, Bangladesh, Dominican Republic, Uruguay, Cape Verde, Brunei, Morocco, Japan, Eswatini, Philippines, Malta, Slovenia, Serbia, Mozambique, Djibouti, Latvia, Ukraine, Mauritius, Bosnia and Herzegovina, South Korea, Sweden, Seychelles, Laos, Albania, Zimbabwe, The Bahamas, Egypt, Burkina Faso, Chile, Botswana, Kuwait, Mauritania, Ghana, Togo, United Arab Emirates, Ireland, Qatar, Malaysia, Greece, Angola, Uganda, Georgia, Mali. A well-developed logistics bond and a partnership network assist us to deliver our units anywhere in the world promptly without disreputing product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or book, phone us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Trunnion mounting | Nodular graphite iron, galvanized |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |