We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822062001
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Stroke | 20 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822062001, communicate with FAMAGA, the world's major producer of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are represented in the quality of products and individual attention to each customer. We appreciate everyone, who conspired with us - hence, our regular customers obtain the most favorable purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4000 such clients, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Chad, Austria, Papua New Guinea, Italy, Niger, Cambodia, Guinea, Zimbabwe, Greece, Central African Republic, Algeria, Belize, Cape Verde, Norway, Slovenia, Switzerland, Argentina, Bulgaria, Zambia, Australia, Peru, Saudi Arabia, Turkmenistan, Ghana, Sierra Leone, Senegal, Liechtenstein, Ireland, Brazil, South Sudan, Libya, Kazakhstan, Mexico, Hungary, Sudan, Paraguay, Morocco, Laos, Armenia, Kyrgyzstan, Macedonia, Ukraine, Mauritania, Andorra, Jordan, Eswatini, Belarus. A advanced logistics link and a partnership network let us to send our products anywhere in the world as soon as possible without compromising product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as keep on top of it.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |