We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412011180
Description
Standardization | ISO 15407-1 |
Type | MS01-AL test block, variant I, with 2 x 3/2-directional valve |
Version | 6x |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Protection class | IP65 |
Port size | form C |
Type | Plug |
Compressed air connection input | G 3/8 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412011180, make contact with FAMAGA, the world's top provider of manufacturing equipment. Our company has lasted for more than ten years - these are years of experience, which are illustrated in the quality of products and personalseparate attention to each buyer. We cherish everyone, who collaborated with us - hence, our regular clients get the most flexible purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4500 such purchasers, and we constantly arrange new agreements. More than 650 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Malaysia, Algeria, Burundi, Eswatini, Angola, The Gambia, Saudi Arabia, Laos, New Zealand, Bangladesh, Grenada, Mauritius, Nigeria, United States, Brazil, Djibouti, Uruguay, Israel, Kazakhstan, Liechtenstein, Egypt, Hungary, Jamaica, Lithuania, Mali, Haiti, Switzerland, Belize, Norway, North Korea, Iran, Australia, Denmark, Thailand, Ghana, Uganda, Iceland. A well-developed logistics chains and a partnership network assist us to ship our elements anywhere in the world quickly without discrediting product quality.
A specific source of pride for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this quantity is amounting every day. We are proud that users choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.
To request or make a request, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Grid dimension | 27,1 mm |
Standards | ISO 15407-1 26 mm |
Working pressure min./max. | 4 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 0,1 mg/m³ |
DC operating voltage | 24 V |
Voltage tolerance DC | -10% / +10% |
Protection class With valve plug connector | IP65 |
Duty cycle | 100 % |
Electrical connection for valve | Plug, form C |
Electr. connection | Plug, M12, 5-pin |
Valve voltage tolerance | -10% / +10% |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pressure regulator is preset at 3 bar . Expansion options available for pilot valves. |
Material |
---|
End plates | Aluminum |
Seal | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |