We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472022041
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7472022041, call FAMAGA, the world's prime producer of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of products and individual attention to each user. We respect everyone, who worked with us - thus, our regular customers accept the most helpful purchase terms and discounts on the industrial equipment market. At this time, there are more than 3500 such customers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Eswatini, Venezuela, Jamaica, Bolivia, Cameroon, Malta, The Bahamas, Pakistan, Syria, Haiti, Japan, Sierra Leone, Albania, Slovakia, Belarus, Nigeria, East Timor, Romania, Seychelles, Brunei, El Salvador, Israel, Mozambique, Tonga, Benin, Ireland, Nicaragua, Kiribati, Georgia, Djibouti, Panama, Sweden, Dominica, Switzerland, Suriname, Yemen, Costa Rica, Finland. A well-developed logistics bond and a partnership network let us to deliver our items anywhere in the earth with no delay without disreputing product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To consult or order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |