We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412006382
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber |
Protection class | IP65 |
Qn 1▶2 | 2000 l/min |
Qn 2▶3 | 380 l/min |
Nominal flow Qn | 2000 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412006382, contact FAMAGA, the world's prime company of factory-made equipment. Our company has advanced for more than ten years - these are ages of experience, which are illustrated in the quality of products and particular attention to each customer. We praise everyone, who engaged with us - therefore, our regular consumers accept the most flexible purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such purchasers, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Togo, Andorra, Armenia, South Africa, Cyprus, Panama, Lesotho, Ecuador, Cuba, Brazil, Iraq, Slovenia, Guinea, Namibia, Poland, Czech Republic, Finland, Sierra Leone, Gambia, Ghana, Eritrea, Australia, Cameroon, Comoros, Kazakhstan, Vietnam, Uzbekistan, Slovakia, Hungary, Burundi, Liechtenstein, Serbia, Tonga, Iceland, Ukraine, Equatorial Guinea, Algeria, India, Sudan, New Zealand, Antigua and Barbuda, Argentina. A well-shaped logistics link and a partnership network let us to ship our goods anywhere in the world with no delay without undermining product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this amount is rising every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Poppet valve, Can be assembled into blocks |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 0 ... 16 bar |
Control pressure min./max. | 2,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Max. particle size | 25 µm |
Duty cycle | 100 % |
Protection class according to EN 60529:2000, without electrical connector | IP65 |
Weight | 0,424 kg |
The delivered product varies from that in the illustration. See the drawing for an exact description. |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The filling valve builds up pressure slowly in the pneumatic systems, i.e. prevents a sudden pressure build-up during a recommissioning after a mains pressure failure or avoids emergency OFF switching. This allows dangerous abrupt cylinder motions to be avoided. Actuating the electric priority circuit disrupts the slow pressure build-up and pressure p1 is immediately applied. For unthrottled operation, the filling valve must be permanently electrically actuated. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |