We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001349
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M12 |
Standardization | ISO 21287 |
Stroke | 60 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422001349, call FAMAGA, the world's key provider of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and individual attention to each client. We understand everyone, who collaborated with us - so, our regular purchasers receive the most convenient purchase forms and discounts on the industrial equipment market. At present, there are more than 4000 such clients, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Argentina, Peru, Egypt, Romania, Laos, Zambia, Netherlands, Vietnam, Gambia, Eritrea, Madagascar, Liechtenstein, Mexico, Australia, Suriname, Kyrgyzstan, El Salvador, Malaysia, Mauritius, Tunisia, Japan, Cape Verde, Central African Republic, East Timor, Greece, Antigua and Barbuda, Brunei, Swaziland, Bolivia, Hungary, Serbia, Belarus, Qatar, North Korea, Benin, Andorra, Panama, Guatemala, Cyprus, Cameroon, Djibouti, Afghanistan. A advanced logistics system and a partnership network guide us to conduct our products anywhere in the globe promptly without compromising product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To consult or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |