We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822344602
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 80 mm |
| Piston rod thread | M20x1,5 |
| Standardization | ISO 15552 |
| Stroke | 80 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 3/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are seeking Aventics (brand of Emerson) 0822344602, contact FAMAGA, the world's key supplier of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each consumer. We respect everyone, who cooperated with us - so, our regular clients bring in the most desirable purchase forms and discounts on the industrial equipment market. Today, there are more than 3500 such customers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Equatorial Guinea, Cameroon, North Korea, Iraq, Philippines, Fiji, Austria, Congo, Algeria, Guatemala, Lebanon, Russia, Tonga, Eritrea, Egypt, Kazakhstan, Montenegro, Armenia, Libya, Niger, Uzbekistan, The Gambia, Uruguay, Belize, Sierra Leone, Cape Verde, Macedonia, New Zealand, Uganda, Brazil, Antigua and Barbuda, Andorra, Yemen, Iran, Djibouti, Kyrgyzstan, Tanzania, Chile, Ukraine, Mozambique, Kiribati, Norway, Lithuania, Morocco. A well-elaborated logistics system and a partnership network assist us to conduct our units anywhere in the globe promptly without damaging product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of industrial equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Standards | ISO 15552 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1,5 ... 10 bar |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Polyurethane |
| Nut for piston rod | Steel, galvanized |
| Scraper | Polyurethane |
| Tie-rods | Stainless steel Steel, galvanized |
| See table for additional data on materials. |
