We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422702811
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 300 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R422702811, reach FAMAGA, the world's principle company of industrial equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of goods and private attention to each orderer. We admire everyone, who engaged with us - thus, our regular consumers bring in the most convenient purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such buyers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Côte d\'Ivoire, Sierra Leone, Tonga, Denmark, Lesotho, Qatar, El Salvador, Montenegro, Bosnia and Herzegovina, Belarus, Palestine, Bhutan, The Gambia, Eswatini, Monaco, Burkina Faso, Bulgaria, Turkey, Mongolia, Kazakhstan, Hungary, Azerbaijan, Philippines, Bangladesh, Antigua and Barbuda, Chad, Serbia, Armenia, Uganda, Equatorial Guinea, Chile, Malta, Tanzania, Nepal, Uruguay, Estonia, Paraguay, Ukraine, Rwanda, India, Mexico, Nigeria, Macedonia, Namibia, Dominica. A well-built logistics bond and a partnership network let us to ship our products anywhere in the earth promptly without disreputing product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To get some advice or place an order, contact us or write a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |