We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412013699
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412013699, call FAMAGA, the world's primary provider of industrialized equipment. Our company has functioned for more than ten years - these are ages of experience, which are symbolized in the quality of merchandises and private attention to each purchaser. We value everyone, who conspired with us - thus, our regular purchasers procure the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Guinea-Bissau, Panama, Vietnam, Cuba, Eswatini, Antigua and Barbuda, Yemen, Papua New Guinea, Rwanda, Honduras, Eritrea, Cameroon, Switzerland, Turkmenistan, Kyrgyzstan, Swaziland, Nepal, Finland, Indonesia, Poland, El Salvador, Tonga, Costa Rica, Philippines, The Bahamas, Zambia, Serbia, Mauritius, Zimbabwe, South Korea, Qatar, Bolivia, Uruguay, Syria, Mongolia, Latvia, China, Seychelles, Luxembourg, Ghana, Peru, Cape Verde, Ireland, Sudan. A well-elaborated logistics network and a partnership network guide us to ship our goods anywhere in the planet promptly without damaging product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is ascending every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as to stay on the top.
To get some advice or order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |