We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5814430000
Description
Standardization | ISO 5599-1 |
Frame size | ISO 4 |
Version | Spool valve |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Nominal flow Qn | 5000 l/min |
Compressed air connection input | Base plate ISO 5599-1 |
Compressed air connection output | Base plate ISO 5599-1 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5814430000, reach FAMAGA, the world's major retailer of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are portrayed in the quality of merchandises and special attention to each consumer. We appreciate everyone, who engaged with us - hence, our regular buyers bring in the most attractive purchase forms and discounts on the factory-made equipment market. At present, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Italy, Vietnam, Bolivia, Papua New Guinea, Norway, Cameroon, Kuwait, Colombia, Czech Republic, Oman, North Korea, Togo, Azerbaijan, Libya, Nepal, Suriname, Pakistan, Yemen, Seychelles, The Gambia, Denmark, Zimbabwe, Malaysia, Nicaragua, Greece, Albania, Haiti, Japan, Mozambique, Panama, Djibouti, Uganda, Mauritius, Zambia, Indonesia, Estonia, Mexico, Peru, Bulgaria, Finland, Luxembourg, Egypt, Algeria. A well-elaborated logistics bond and a partnership network let us to dispatch our elements anywhere in the world on-time without damaging product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is growing every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To ask a question or place an order, phone us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Spool valve |
Blocking principle | Single base plate principle |
Sealing principle | Soft sealing |
ATEX class G | 2G Ex mb II T4 |
ATEX class D | 2D Ex tD A21 T130°C |
Connection type | Plate connection |
Standards | ISO 5599-1, ISO 4 |
Nominal flow Qn | 5000 l/min |
Compressed air connection | Base plate ISO 5599-1 |
Working pressure min./max. | -0,95 ... 16 bar |
Control pressure min./max. | 3 ... 16 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air class 6-4-3 |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Mounting screw | with hexagon socket |
Mounting screw tightening torque | 10 Nm |
Weight | 1,28 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum |
Seals | Acrylonitrile butadiene rubber |