We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627443
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 320 mm |
Piston rod thread | M48x2 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Acrylonitrile butadiene rubber |
ATEX optional | |
Compressed air connection | G 1 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480627443, reach FAMAGA, the world's foremost company of factory-made equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and private attention to each purchaser. We admire everyone, who engaged with us - therefore, our regular consumers accept the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Panama, El Salvador, Eritrea, Gambia, Croatia, Liechtenstein, Nepal, Romania, Belarus, Guyana, Oman, United Arab Emirates, Austria, Madagascar, Armenia, Slovakia, Nicaragua, Jamaica, Antigua and Barbuda, Japan, Luxembourg, Sudan, Zimbabwe, Brazil, Poland, Denmark, Djibouti, Syria, Costa Rica, Samoa, Peru, Turkey, Burkina Faso, Kuwait, Finland, Zambia, Brunei, Ireland, Suriname, Guatemala, Namibia, Comoros, Tonga. A well-shaped logistics network and a partnership network allow us to ship our products anywhere in the world promptly without disreputing product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as stay in control.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |
Nut for piston rod | Steel, galvanized |
Scraper | Acrylonitrile butadiene rubber |
Tie-rods | Stainless steel |