We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480163018
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480163018, connect FAMAGA, the world's principle provider of streamlined equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of goods and individual attention to each orderer. We esteem everyone, who collaborated with us - thus, our regular consumers pick up the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4 thousand such clients, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, San Marino, Benin, Slovenia, Ireland, Italy, Papua New Guinea, Palestine, Zimbabwe, Peru, Ghana, Ukraine, Indonesia, Australia, Guinea, Nicaragua, Costa Rica, Togo, Zambia, Philippines, Bolivia, United States, Monaco, Jordan, Angola, Netherlands, Mongolia, Luxembourg, Mauritius, Tajikistan, Egypt, Vietnam, Algeria, Guyana, Moldova, Botswana, Sweden, Bangladesh, Guatemala, Dominica, South Korea, Seychelles, Bosnia and Herzegovina, Mexico, Mozambique, Morocco, Estonia. A advanced logistics network and a partnership network assist us to conduct our units anywhere in the planet on-time without compromising product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is ascending every day. We are happy that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |