We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009223
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, closed without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 40 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 14000 l/min |
Compressed air connection | G 1 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412009223, call FAMAGA, the world's foremost company of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of products and individual attention to each client. We appreciate everyone, who engaged with us - hence, our regular purchasers bring in the most flexible purchase conditions and discounts on the machine made streamlined equipment market. Now, there are more than 4000 such purchasers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Venezuela, Haiti, Palestine, Brazil, Dominican Republic, Liberia, Colombia, Burma, France, Mali, Senegal, Iceland, New Zealand, Grenada, Lithuania, Chile, Afghanistan, Uzbekistan, Djibouti, Kyrgyzstan, Rwanda, Tunisia, Andorra, Nepal, Equatorial Guinea, Guatemala, Czech Republic, United Arab Emirates, Australia, Thailand, Denmark, Ecuador, Bolivia, Uganda, Syria, Macedonia, Tajikistan, Antigua and Barbuda, Pakistan, North Korea, Cameroon, Armenia, Yemen. A advanced logistics system and a partnership network allow us to ship our products anywhere in the world immediately without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as to stay on the top.
To request or place an order, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 14000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 87 cm³ |
Filter element | exchangeable |
Max. Internal air consumption | 1,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 7 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate |
Protective guard | Polyamide |
Filter insert | Polyethylene |