Aventics (brand of Emerson) 0822341903
  Aventics (brand of Emerson) 0822341903

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822341903 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822341903

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 40 mm
Piston rod thread M12x1,25
Standardization ISO 15552
Stroke 100 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 1/4
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822341903

If you are questing Aventics (brand of Emerson) 0822341903, catch up with FAMAGA, the world's top supplier of machine made equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of spare parts and private attention to each buyer. We admire everyone, who joined with us - so, our regular buyers get the most flexible purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 3500 such consumers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA works all over the earth . A well-developed logistics connection and a partnership network help us to send our goods anywhere in the globe with no delay without damaging product quality.

A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.

All products from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.

To get some advice or order, get in touch with us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 0822341903

Standards ISO 15552
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed!
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Trunnion mounting Nodular graphite iron, galvanized
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.