We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480144198
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 80 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480144198, connect FAMAGA, the world's chief distributor of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of products and private attention to each user. We understand everyone, who liased with us - so, our regular clients receive the most beneficial purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 600 proceedings are resolved per day, because FAMAGA operates all over the planet Germany, United Kingdom, San Marino, Thailand, Uruguay, Albania, Haiti, Oman, Congo, Slovenia, Monaco, Cuba, Botswana, Kuwait, Finland, Palestine, The Gambia, Switzerland, South Sudan, Benin, Romania, Austria, Eritrea, Iraq, Samoa, Togo, Kyrgyzstan, Tajikistan, Sierra Leone, Angola, Kazakhstan, Swaziland, India, China, New Zealand, United States, Guatemala, East Timor, Comoros, Indonesia, Qatar, Morocco, Nepal, Philippines, Burkina Faso. A well-shaped logistics system and a partnership network allow us to ship our goods anywhere in the planet immediately without undermining product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |