We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412009177
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, closed without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 14000 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412009177, catch up with FAMAGA, the world's dominant vendor of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each consumer. We esteem everyone, who joined with us - hence, our regular customers procure the most flexible purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such clients, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, France, Dominica, Portugal, Costa Rica, Argentina, Italy, Liberia, Honduras, Grenada, Ecuador, Burma, Slovakia, Uganda, Moldova, Singapore, Tonga, Armenia, Tunisia, Chile, Malawi, Uzbekistan, Yemen, Saudi Arabia, Brazil, Iceland, Latvia, Guyana, Turkmenistan, Azerbaijan, North Korea, Swaziland, Central African Republic, Albania, Laos, Mauritius, Hungary, Rwanda, Bosnia and Herzegovina, Bulgaria, Australia, Kenya, Sudan, Bangladesh, Eswatini, Paraguay. A well-elaborated logistics bond and a partnership network help us to conduct our elements anywhere in the world with no delay without disreputing product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this quantity is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as to stay on the top.
To consult or make a request, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 14000 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 87 cm³ |
Filter element | exchangeable |
Max. Internal air consumption | 1,5 l/min |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |