We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822341511
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822341511, communicate with FAMAGA, the world's main supplier of machine made equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of products and personalseparate attention to each purchaser. We cherish everyone, who cooperated with us - hence, our regular buyers bring in the most favorable purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such consumers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Cuba, Congo, Liberia, Kazakhstan, Japan, Belize, Senegal, Guinea, Ghana, The Gambia, Lebanon, Mongolia, Slovakia, India, Oman, Turkey, Tunisia, Andorra, Tajikistan, Cameroon, Montenegro, Hungary, Mauritius, Tanzania, Iceland, Uzbekistan, Burundi, Poland, Rwanda, Russia, North Korea, Thailand, Australia, Norway, Iraq, Antigua and Barbuda, Namibia, Denmark, Cyprus, Lithuania, Uganda. A well-developed logistics connection and a partnership network cheer us to dispatch our goods anywhere in the globe with no delay without undermining product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only experts, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this quantity is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as keep on top of it.
To request or make a request, get in touch with us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |