Aventics (brand of Emerson) 0822340908
  Aventics (brand of Emerson) 0822340908

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822340908 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822340908

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 32 mm
Piston rod thread M10x1,25
Standardization ISO 15552
Stroke 320 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822340908

If you are inspecting Aventics (brand of Emerson) 0822340908, get in touch with FAMAGA, the world's primary company of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of spare parts and private attention to each orderer. We esteem everyone, who conspired with us - therefore, our regular buyers procure the most acceptable purchase conditions and discounts on the factory-made equipment market. Today, there are more than 4000 such buyers, and we constantly sign new agreements. More than 750 transactions are made per day, because FAMAGA works all over the world . A well-developed logistics connection and a partnership network guide us to dispatch our goods anywhere in the planet on-time without compromising product quality.

A specific source of honor for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of factory-made equipment.

All spare parts from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.

To ask a question or book, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 0822340908

Standards ISO 15552
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed!
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Trunnion mounting Nodular graphite iron, galvanized
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.