We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822498302
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822498302, make contact with FAMAGA, the world's principle distributor of industrialized equipment. Our company has existed for more than ten years - these are ages of experience, which are described in the quality of merchandises and individual attention to each orderer. We understand everyone, who liased with us - therefore, our regular clients bring in the most convenient purchase terms and discounts on the manufacturing equipment market. Today, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the earth Germany, United Kingdom, China, Tunisia, Colombia, Brazil, South Korea, El Salvador, Lithuania, Jordan, Ghana, Botswana, Burma, South Sudan, Lebanon, Albania, Hungary, Sweden, Poland, Oman, Costa Rica, Samoa, Rwanda, Cape Verde, Afghanistan, Burkina Faso, Libya, Mongolia, Egypt, Andorra, Uzbekistan, The Gambia, Comoros, Mexico, Philippines, Fiji, Macedonia, Haiti, Russia, Pakistan, Vietnam, Bulgaria, United States, Ireland, Yemen, Estonia. A well-developed logistics link and a partnership network allow us to conduct our items anywhere in the world on-time without compromising product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.
To consult or book, get in touch with us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |