We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821301545
Description
Parts | Standard oil-mist lubricator |
Type of filling | Manual oil filling |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
Nominal flow Qn | 6000 l/min |
Compressed air connection | G 3/4 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0821301545, communicate with FAMAGA, the world's major company of factory-made equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and personalseparate attention to each customer. We cherish everyone, who worked with us - so, our regular buyers procure the most flexible purchase forms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the globe Germany, United Kingdom, India, Jamaica, Lebanon, Guatemala, Rwanda, Burundi, Samoa, The Gambia, Madagascar, Namibia, Canada, Ecuador, Honduras, Zambia, Burkina Faso, Central African Republic, Kyrgyzstan, Bhutan, Algeria, Greece, Poland, Armenia, Kazakhstan, Israel, Comoros, Peru, Slovakia, Cyprus, Guyana, Antigua and Barbuda, Paraguay, Austria, Malta, Azerbaijan, Djibouti, Iraq, Belize, Mali, Norway, Brunei, Moldova, Brazil, Turkey, Nigeria. A well-developed logistics bond and a partnership network assist us to send our units anywhere in the globe immediately without undermining product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To request or make a request, contact us or write a message to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Type of filling | Manual oil filling |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |