We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822243401
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822243401, communicate with FAMAGA, the world's foremost retailer of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of goods and special attention to each orderer. We value everyone, who engaged with us - therefore, our regular consumers accept the most desirable purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 3500 such consumers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Laos, Cyprus, South Africa, Malawi, South Korea, Austria, Malta, Ireland, Malaysia, Kuwait, Slovakia, Netherlands, Tunisia, Eritrea, Argentina, Comoros, Algeria, Grenada, Kazakhstan, Liberia, Romania, Brazil, Afghanistan, Zambia, Turkey, Paraguay, Indonesia, Botswana, Kyrgyzstan, Bolivia, El Salvador, Tonga, Bulgaria, Senegal, Eswatini, Antigua and Barbuda, Serbia, Burundi, Cameroon, Niger, India, Morocco, Hungary, Israel, Uruguay, Lithuania. A well-shaped logistics network and a partnership network allow us to dispatch our goods anywhere in the globe immediately without undermining product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, contact us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |