We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007081
Description
Parts | Diaphragm-type dryer |
Housing | Polyamide |
Reservoir | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 950 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412007081, call FAMAGA, the world's prime vendor of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each user. We cherish everyone, who liased with us - so, our regular purchasers bring in the most favorable purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 3500 such customers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Finland, Eswatini, Sri Lanka, Netherlands, Kyrgyzstan, Latvia, Malaysia, Niger, Andorra, Australia, Belarus, Liberia, Philippines, Chad, Ireland, Austria, Zimbabwe, Eritrea, Madagascar, The Bahamas, Saudi Arabia, Egypt, Ghana, Samoa, Kuwait, Afghanistan, Senegal, Argentina, Seychelles, Macedonia, Jordan, Cyprus, Yemen, Swaziland, Vietnam, Jamaica, Laos, The Gambia, Croatia, Mauritania, Estonia, Uruguay, South Korea, Poland, Dominica, Pakistan. A well-elaborated logistics link and a partnership network cheer us to ship our goods anywhere in the world immediately without disreputing product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as stay in control.
To get some advice or order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Diaphragm-type dryer |
Parts | Diaphragm-type dryer |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 4 ... 12,5 bar |
Ambient temperature min./max. | 2 ... 50 °C |
Medium temperature min./max. | 2 ... 50 °C |
Medium | Compressed air Neutral gases |
Filter element | not exchangeable |
Lowering pressure dew point | 20 °C |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Notice: air may not contain condensate purge air approx. 12% of nominal flow Qn Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Recommended pre-filtering μm | 5 / 0,01 µm |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seal | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Aluminum |