We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471311603
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 7471311603, communicate with FAMAGA, the world's foremost provider of manufacturing equipment. Our company has functioned for more than ten years - these are cycles of experience, which are portrayed in the quality of products and particular attention to each purchaser. We respect everyone, who collaborated with us - so, our regular clients get the most acceptable purchase forms and discounts on the manufacturing equipment market. Now, there are more than 3500 such consumers, and we constantly make new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Morocco, Kyrgyzstan, Jamaica, Honduras, Dominican Republic, Burma, Belarus, Algeria, Israel, Singapore, Tajikistan, Nigeria, Egypt, Armenia, Mauritius, Netherlands, Eswatini, China, Turkmenistan, India, Haiti, Suriname, Georgia, United Arab Emirates, Bangladesh, Fiji, Kazakhstan, Argentina, South Korea, Tonga, Cyprus, Seychelles, Guatemala, Iran, United States, Mauritania, Zimbabwe, Brunei, Cape Verde, The Gambia, Tunisia, Serbia, Sweden. A well-shaped logistics connection and a partnership network guide us to dispatch our goods anywhere in the earth immediately without damaging product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to our work. We request into our team only experts, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this amount is ascending every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To get some advice or order, phone us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |